Skip to content

CyclingCharger guides

Alfine Di2 Hub Gears: Identify the Motor Unit and Battery Before Charging

CyclingCharger editorial team · Updated 21 November 2026

An Alfine Di2 hub gear does not identify its charging kit. The hub, electronic motor unit, battery and any display are separate parts of the system. A commuter bicycle with enclosed gearing should not be matched to a road-bike charger just because both say Di2.

Identify the electrical build

Shimano's C-473 lifestyle sections list motor units such as MU-S705, MU-UR500 and MU-UR510 with defined battery and control groups. These are different identifiers from the SG model on the hub itself. Record both rather than searching only for an “Alfine battery”.

Four lines for a hub-geared bicycle's service record
Line What to record
Hub and motor unit Full SG and MU models; the hub's gear count alone is insufficient.
Battery and mount Exact internal battery or external battery/mount arrangement.
Display or junction Full model and the charge port shown in its instructions.
Drive system Whether this is a non-assisted bicycle or an e-bike with a documented integration.

Use the matching chart notes

The chart separates BM-DN100/BT-DN110 arrangements from older SM-BMR1/SM-BMR2/SM-BTR2 groups. It also attaches restrictions to adjustment functions on the named motor units. A charge-port demonstration is not proof that a particular display can perform every adjustment without software.

If the bicycle is electrically assisted, obtain the bicycle maker's complete electrical specification as well. Shimano publishes separate third-party e-bike integration charts. Do not assume an integrated system needs a separate internal Di2 charger or that the road-bicycle charging procedure applies.

Make the right request

Give a workshop the four-line record and describe whether the problem is a low battery, a missing charger or a gear-position adjustment. A bicycle that charges normally but needs motor-unit adjustment is not automatically repaired by another charger. Do not disturb sealed connections or attempt hub adjustment from a road-derailleur procedure.

For an identified standalone battery arrangement, use the battery and charge-point table. If considering the shop's internal-charger offer, require confirmation of the supplied model and complete supported hub-system combination first.

Sources and scope

Checked 21 November 2026. Use the exact component instructions and current supported system. This guide does not claim independent compatibility testing of the item sold by the shop.