Skip to content

CyclingCharger guides

Adding EW-WU111 to a Di2 Display Build: Check the One-Wireless-Unit Limit

CyclingCharger editorial team · Updated 21 November 2026

Do not add EW-WU111 merely because you want better phone connectivity. First identify the display and any wireless unit already installed. In the specified BM-DN100/BT-DN110 legacy group, Shimano limits the system to one unit with a wireless chip.

Read every label in the wireless path

The C-473 chart marks restrictions on entries including SC-M9051, SC-MT800 and EW-WU111 in this group. Its note says the system does not work if multiple units with wireless chips are connected. A display and a separate module are therefore not simply two independent features to add together.

A pre-purchase inventory
Part Record
Battery or battery mount Which exact chart group applies.
System display The full SC model, including suffixes; similar-looking displays can have different features.
Existing wireless module Any SM-EWW01, EW-WU101, EW-WU111 or other documented unit.
Desired connection Which application or receiver and which supported function you actually need.

A missing connection is not a shopping list

If a phone cannot find the bike, check the complete supported arrangement and connection mode before ordering hardware. The chart has application restrictions on particular legacy components. A successful charging demonstration does not establish Bluetooth capability, and a wireless chip does not establish support for every app task.

Do not repeatedly disconnect waterproof wires to search for an unseen module. Use the build record, accessible labels and workshop documentation. An approved configuration change can require checking all connected units, not just removing the part that looks redundant.

Ask for a supported final arrangement

Give the workshop the inventory and the intended connection task. Ask it to identify the valid single-wireless-unit configuration for the relevant battery group and retain any display functions you need. The rules in this page must not be transferred to the different wireless pairing limits of BT-DN300 or BT-DN320 systems.

Use the older-system discovery guide for the initial symptom, or the display-replacement checklist before a cockpit change. An extra charger or wireless module is not a substitute for identifying the existing system.

Sources and scope

Checked 21 November 2026. Use the exact component instructions and current supported system. This guide does not claim independent compatibility testing of the item sold by the shop.