Skip to content

CyclingCharger guides

Shimano RD-R8150 Lights: Battery, Charging and Bluetooth

CyclingCharger editorial team · Updated 19 November 2026

On the Shimano RD-R8150 rear derailleur, the same LED serves several purposes. Before reading the colour, check whether the charge cable is connected and what you did with the function button.

When the bike is unplugged

For a main-battery check, press the function button once for less than half a second. Shimano lists these bands:

When the cable is connected

Continuously blue after connecting indicates charging has started. When that blue charging light goes out, charging is complete. Flashing red during charging is a different case: stop and consult the manual's troubleshooting section. Do not interpret this as the red from a short battery-check press.

When you were using the button for something else

Flashing blue after holding for Bluetooth LE connection is a pairing signal. A double click selects shift mode and can produce blue indications as well; neither of those actions establishes that the bike is charging. For example, if the unplugged bike flashes blue while you search for it on a phone, finish or cancel pairing and then make the separate short-press battery check.

Next: compare the charging times for the identified equipment. These signals are specific to RD-R8150. Source: Shimano RD-R8150 UM-3GK0A, checking battery level, connection and charging (copy).