Skip to content

CyclingCharger guides

Does an SM-BCR2 Charger Also Connect Di2 to a PC?

CyclingCharger editorial team · Updated 19 November 2026

A USB-powered charger and a PC link play different roles. Shimano's catalogue describes the genuine SM-BCR2 as a charger with limited PC linkage for its listed systems. That description applies to the named Shimano hardware. A third-party charging lead and an EW-EC300 charge cable do not acquire those functions by plugging into a computer.

Decide what you actually need to do

Charge a confirmed legacy system
Record the battery and Junction A labels, then verify the exact supported combination, charger model and completion indication.
Read component data, diagnose faults or update firmware
Ask for written support for the hardware, required E-TUBE software and the exact function. Shimano also lists SM-PCE02 as a PC linkage device. Match the service route to Shimano's current information or ask a workshop if the scope is unclear.

Check a seller's claim

If a seller says “SM-BCR2 compatible” and can only show a charge light, you have evidence for charging in that particular test and no evidence of PC recognition on your build. Before planning a firmware update, identify the hardware and get the function confirmed. Do not start an update as a test of an unidentified lead.

Next: verify the legacy charging combination, then ask for the separate PC function if you need it.

Sources: Shimano SM-BCR2 specifications; Shimano specifications v029, charger and PC linkage tables.