Skip to content

CyclingCharger guides

Replacing a Di2 Display with Junction A: Keep the Functions You Need

CyclingCharger editorial team · Updated 21 November 2026

A display-to-junction change needs more than a plug and charging-port check. On a legacy Di2 build, a system information display can perform functions that a smaller Junction A does not replace in the same way.

List the functions before choosing parts

A cockpit-change checklist
Function Question to resolve
Charging Does the proposed part provide the charge port supported for this exact battery?
Battery and gear information What local information will remain available?
Synchronised shifting Does the system require a specified display for that function?
Wireless connection Will the new complete arrangement still satisfy the wireless-device limit?

Read the category-specific restrictions

For the BM-DN100/BT-DN110 MTB category, Shimano's C-473 note requires SC-M9050, SC-M9051 or SC-MT800 for synchronised shifting. Removing the required display is therefore not just a cosmetic cockpit change. The chart also limits the system to one unit with a wireless chip in the specified legacy group.

The restrictions differ between battery groups and categories. A road-bike photograph showing a small junction is not proof that a particular MTB arrangement can lose its display while retaining every function. Keep the exact display, battery, derailleur and switch models in the request.

Separate a supported replacement from a conversion

If the old display is broken, ask a workshop to identify a supported equivalent and any configuration work. If you want a tidier cockpit, specify which functions you are willing to change. Do not buy a Junction A solely because it has the same number of wire ports.

The proposed charge port must also be accessible with the normal covers and mounting arrangement. Do not substitute a simple wiring junction for a charging-port device or modify a port to accept a charger.

Check the finished build

After approved work, confirm the normal charge, local battery check and intended shift functions separately. A successful charge does not prove synchronised operation or wireless access. Use the charge-point identification guide for location, and the operating-mode guide only for the model it describes. This article does not authorise a particular component swap.

Sources and scope

Checked 21 November 2026. Use the exact component instructions and current supported system. This guide does not claim independent compatibility testing of the item sold by the shop.