Skip to content

CyclingCharger guides

One Wireless Di2 Shift Lever Stopped Working: What to Check

CyclingCharger editorial team · Updated 19 November 2026

If a Shimano wireless Di2 bike shifts from one lever but not the other, record which input failed before buying a charger. The responding side shows that at least part of the system is working. The main derailleur battery and the wireless lever's coin cells are separate checks.

Check both inputs with the charging cable disconnected

  1. Put the bike securely in a position for an ordinary stationary shifting check. On RD-R8150, the derailleurs do not operate while charging, so a plugged-in test cannot distinguish the levers.
  2. Check the derailleur's main-battery indication and test each expected input. A wireless switch may need another operation after a period of inactivity, as described in the RD-R8150 troubleshooting section.
  3. If only one lever remains unresponsive, verify the exact lever model. Shimano lists CR1632 for ST-R8170-R and ST-R8170-L. Use the lever manual for the quantity, polarity and access; don't transfer the cell layout from a different model. If the cell check doesn't explain it, check pairing and button assignment with a workshop or the applicable E-TUBE instructions.

Example: the right switch still moves the rear derailleur, and the rear battery check is green, but an expected left input does nothing. Note the left model and whether it was recently changed or re-paired. Buying a new main-battery charger would leave that missing-input question unresolved.

Next: read the RD-R8150 main-battery indicator correctly.

Sources: Shimano RD-R8150 UM-3GK0A, gear shifting troubleshooting (copy); Shimano specifications v029, ST-R8170 shift/brake lever table.