CyclingCharger guides
EW-EC300: Charging a Power Meter Is Not Charging Di2
CyclingCharger editorial team · Updated 20 November 2026
The same EW-EC300 cable name appears in more than one Shimano charging task. Charging a compatible crank power meter does not charge the bicycle's Di2 shifting battery. Read the manual for the component at the bicycle end of the cable.
Two jobs, two battery checks
| Component being charged | What the charge supports | USB AC requirement in the checked manual |
|---|---|---|
| RD-R8150 charging arrangement | The installed compatible Di2 main battery and shifting system | 5.0 V DC, at least 1.0 A DC |
| FC-R8100-P power meter | The power meter's own battery and measurement function | 5.0 V DC, at least 0.5 A DC |
These are model-specific minimums from the checked manuals, not a new rating for every EW-EC300 application. A 5 V / 0.5 A source described for the power meter does not meet the RD-R8150 requirement. A cable page that opens a crank manual must not be treated as a derailleur manual.
Make a two-line charge routine
- Identify the exact crank model, charging point and its own battery indication. A crank without the supported power-meter model does not acquire charging capability from the cable.
- Separately identify the Di2 battery and the derailleur charging arrangement. Observe that component's charging signal.
- After each charge, disconnect and close the appropriate cover. Check power data and normal shifting as separate functions before riding.
For example, a rider can see power on the cycle computer while the Di2 main battery is low, or shift normally while no crank power data is being transmitted. One successful function does not prove the other battery is charged. Wireless shift-lever coin cells are another separate check.
Choose equipment by the actual task
Shimano's current power-meter table lists EW-EC300 for FC-R9200-P, FC-R9200-PX and FC-R8100-P. That does not identify the actual lead sold in a third-party listing. Confirm its supplied model and supported component before ordering.
For the Di2 task, use the RD-R8150 USB source check and system-specific charging guide. Keep the power-meter manual with the crank entry in your kit record.
Sources and scope
- Shimano power-meter and charging-cable specification tables
- RD-R8150 power and charging precautions (manual copy)
- FC-R8100-P power-meter manual, UM-0N50A (copy)
Checked 20 November 2026. Model-specific instructions take priority over a general guide. This article is not a report of independent compatibility or battery testing.