CyclingCharger guides
Which Di2 Battery Is Your Cycle Computer Showing?
CyclingCharger editorial team · Updated 20 November 2026
A battery symbol on a cycle computer may not be the Di2 main battery. Check the field name and the paired sensor. A computer's own charge, a power meter battery, a Di2 main battery and wireless-lever batteries are different readings.
Start with the data field
The RD-R8150 manual says the derailleur can transmit gear-position information, Di2 battery level, dual-control-lever battery level and adjustment-mode information to receivers supporting the relevant ANT or Bluetooth LE connection. It also says the information actually displayed depends on the cycle computer or receiver.
| Field you identify | Useful check | Do not conclude |
|---|---|---|
| Di2 main-battery level | Compare with the model's local battery check when the bike is awake and connected. | That the lever coin cells or power meter have also been charged. |
| Lever battery level | Identify the specific lever information supported by your computer. | That a main-battery charger will replenish that cell. |
| Computer or another sensor battery | Read that device's own instructions. | That this is a direct measurement of the Di2 battery. |
Connect without guessing a menu
For the RD-R8150 cycle-computer connection, Shimano describes putting the computer in its connection mode, performing a gear-shifting operation and following the computer's screen to select the device. The exact screens and available fields belong to the computer's manual. A normal stationary check should use a secure bicycle setup, with the charging cable disconnected.
If the computer still shows an old value, verify that it is connected to the intended bicycle and that you are viewing a live field rather than a saved ride. A stale or absent field alone does not identify a failed battery or charger. Record the local indication, field name and sensor identity before replacing parts.
Make the charging decision separately
Use the RD-R8150 local check for that model. If the main battery is low, use its correct charge route. If only a lever is low, use the lever-battery instructions. A display of 50% is not a promise of a fixed remaining distance.
Sources and scope
Checked 20 November 2026. Model-specific instructions take priority over a general guide. This article is not a report of independent compatibility or battery testing.