CyclingCharger guides
My 11-Speed Di2 Charges, but the Phone Can't Find It
CyclingCharger editorial team · Updated 19 November 2026
Normal charging on an older Shimano Di2 build does not show that it has a phone link. On the example build with BT-DN110 and EW-WU111, the EW-WU111 provides the wireless connection. Check the installed hardware before buying a new charger or repeatedly opening the app.
Confirm the wireless route
Look in the build sheet or service record for EW-WU111 or another supported wireless unit. EW-RS910 is Junction A, which can appear next to EW-WU111 in Shimano's diagram. Seeing an EW-RS910 or getting a charge through it is not proof an EW-WU111 is fitted. Ask a workshop to identify the build if its parts are concealed.
If the unit is present
With a charged, unplugged bike, use Bluetooth LE and put the bike into connection mode as described in its junction and wireless-unit manuals. Look for the unit in the applicable E-TUBE PROJECT phone app. Button sequences vary: a sequence for RD-R8150 is not an instruction for an old Junction A. Finish or cancel the Bluetooth session from your device when done, as Shimano warns that leaving it connected can increase battery use.
Example: a working BT-DN110/EW-RS910 bike with no documented wireless unit needs a hardware check first. A documented EW-WU111 build that still won't appear after the correct procedure needs connection diagnosis. Neither observation alone calls for a replacement charger.
Sources: Shimano EW-WU111 UM-2710B, system diagrams and wireless notes (copy); Shimano wireless unit specifications. If the app has been left connected, record it during a battery-loss check.