Skip to content

CyclingCharger guides

Older Di2 and Synchronised Shifting: Check the Battery Group Before an Upgrade

CyclingCharger editorial team · Updated 21 November 2026

Do not buy a charger or request a generic firmware update as proof that an older Di2 bicycle can gain synchronised shifting. Start with the battery group and complete component combination. Shimano's legacy chart gives different restrictions by category.

Define the function you want

Describe whether you want front/rear coordinated shifting, a particular switch arrangement or simply normal manual operation. A mode name on another bicycle is not evidence that your build supports the same behaviour.

Two chart checks that change the upgrade decision
System branch Restriction to check
BM-DN100/BT-DN110, MTB category The current chart requires SC-M9050, SC-M9051 or SC-MT800 for synchronised shifting.
Older SM-BMR1/SM-BMR2/SM-BTR2 branch The chart says synchronised shifting is not available with road-type rear derailleurs; its MTB requirements must be read separately.

These notes do not make every part within a branch interchangeable. Keep the battery/mount, front and rear units, display and switches together when checking the complete supported combination.

Separate support from configuration

A supported system can still need the correct configuration. An unsupported arrangement does not become supported just because a PC can see it. Ask the workshop to identify both the required hardware and the applicable software procedure before agreeing to an upgrade.

If a proposed change removes a display, check which function depended on that display. If it changes the battery group, treat that as a system change and verify the charge point as well. A charger is power equipment, not an upgrade licence for another function.

Agree a clear outcome

  1. Record the current component list and the desired function.
  2. Have the workshop identify the exact chart conditions and any missing hardware.
  3. Decide whether to retain manual operation or proceed with the supported complete change.
  4. After approved work, check charging and the intended shift behaviour separately in a suitable stationary setting.

For a newer RD-R8150 bike already showing an unexpected front change, use the operating-mode guide. For an older internal-battery replacement, see the legacy battery-build checklist.

Sources and scope

Checked 21 November 2026. Use the exact component instructions and current supported system. This guide does not claim independent compatibility testing of the item sold by the shop.