Skip to content

CyclingCharger guides

10-Speed Ultegra Di2: Check the Battery and Junction Before Buying a Charger

CyclingCharger editorial team · Updated 21 November 2026

A ten-speed Ultegra Di2 bicycle needs a legacy-system check before a charger purchase. An RD-6770 or FD-6770 label is a useful starting point, but the installed battery and junction determine the charging arrangement. Parts may have changed since the bicycle left the factory.

Make a three-part record

Evidence to request from a seller or workshop
Part Record Why it changes the decision
Battery External SM-BTR1 or the exact internal battery model A removable external battery and a supported internal arrangement use different charging devices.
Battery mount Complete mount model where applicable Shimano separates older mount groups from BM-DN100 in its system chart.
Junction or display Full model, not just “Junction A” A wiring connection is not automatically an approved charging port.

Take the legacy exception seriously

Shimano's C-473 chart includes RD-6770 and RD-6770-A in legacy ten-speed groups. Its note says SM-BCR2 requires a device with a charging port and specifically excludes SM-EW67-A-E with SM-BCR2 and SM-BTR2. A seller pointing to that junction has not demonstrated a supported internal-battery charge route.

If the bike has SM-BTR1, identify the specified external-battery charging kit rather than assuming the rear derailleur has a modern charge port. If it has an internal battery, have the actual battery/junction combination checked against the matching chart section. Do not test an uncertain combination by forcing a borrowed plug.

Ask for a useful handover demonstration

  1. See the model labels or documented build, without dismantling the internal battery.
  2. Ask the seller to show the correct complete charging kit and normal completion indication for that equipment.
  3. Disconnect charging equipment before the normal stationary shifting check.
  4. Record missing leads, a damaged port or an unconfirmed build as unresolved facts before agreeing the purchase.

The generation guide helps organise the evidence. If you need the current internal-charger offer, obtain confirmation of its actual supplied model and supported legacy combination first. This guide does not establish that the offer fits a 6770 bicycle.

Sources and scope

Checked 21 November 2026. Use the exact component instructions and current supported system. This guide does not claim independent compatibility testing of the item sold by the shop.