CyclingCharger guides
Shimano Di2 Chargers: Check the Generation and Connector
CyclingCharger editorial team · Updated 21 November 2026
Match the battery label and the part with the charging socket before buying a Shimano Di2 charger. “Di2”, “Ultegra” and the number of sprockets are useful clues, but older bikes can have replacement parts.
Identify the connection, then choose the charger
Match the charging route before choosing equipment. BT-DN110/BT-DN110-A with a supported Junction A uses SM-BCR2; the listed BT-DN300/RD-R8150 arrangement uses EW-EC300 at the rear charging port; removable BT-DN320 uses EC-DN100. These routes are not interchangeable.
If your charger is missing or damaged, compare the current internal-charger offer only after recording your battery and exact socket. Ask the seller to confirm its supplied manufacturer, model, connector and supported combination. The listing is not established as genuine SM-BCR2 or as suitable for EW-EC300/EC-DN100 systems. If your parts are unclear, use the full generation and port checks first.

Which Di2 charger should I buy?
Choose by the installed battery and charging socket, then verify the actual item offered. For the confirmed combinations below, SM-BCR2, EW-EC300, SM-BCR1 and EC-DN100 describe different charging routes. They are not interchangeable plugs, and this table is not a statement that our shop stocks all four.
- Both battery and socket identified: find the matching row below, then compare that requirement with the seller's actual model and connector.
- Only “Di2”, “Ultegra” or a speed count known: pause the purchase. Check the bicycle build record or ask a workshop to identify the installed parts; do not dismantle the battery just to read its label.
- A cable looks similar but the route differs: do not force it or treat a wiring adapter as a charging adapter.
Our Di2 battery charger collection leads to the current internal-battery charger offer. Its supplied manufacturer, precise model and connector remain unconfirmed, so do not order on the strength of a model name in this guide alone.
Find three identifiers
- Battery: use the model on the battery, the bike's service record or the original build sheet. Don't dismantle an internal battery to read it.
- Rear derailleur: note the full RD model, including the digits.
- Charging location: check the identified junction, rear derailleur or removable battery against its manual. A neighbouring port may serve a different purpose.
Match the battery and charging point
| What you have | What to confirm |
|---|---|
| BT-DN110 / BT-DN110-A | SM-BCR2 via a supported Junction A. Look for EW-RS910 at the bar end or in the frame, or SM-EW90-A/B near the cockpit. Confirm the installed junction. These are examples from Shimano's legacy system charts. |
| SM-BTR2 | Use the C-473 chart for the actual legacy build. SM-BCR2 requires a supported charging port; Shimano explicitly excludes SM-EW67-A-E with SM-BCR2 and SM-BTR2. Verify the junction before buying. |
| Removable SM-BTR1 | Shimano specifies the SM-BCR1 cradle for the removed battery. |
| BT-DN300 with RD-R9250, RD-R8150, RD-R7150 or RD-RX825 | EW-EC300 connects at the rear derailleur's charging port for these listed combinations. Check the full RD model rather than buying by speed count. |
| Removable BT-DN320 | EC-DN100 charges the removed battery. RD-RX827-SGS is one example of this separate system. |
Example: a used 11-speed bike with SM-BTR2 and an unidentified cockpit junction needs another model check. Seeing a BT-DN110 label and a supported EW-RS910 is a different starting point. See the used 11-speed Ultegra checks or the charging steps once you know the route.
Before ordering an internal-battery charger
Ask the seller for the supplied charger's manufacturer, model, connector and supported battery/junction combinations. A reference to SM-BCR2 does not identify the item you will receive. Charging, PC communication and firmware updates are separate functions; confirm any function you need.
Check the Di2 charger listing.
Sources: Shimano C-473 and C-842 compatibility charts; Shimano 2026–2027 specifications, pp. 240–242; Junction A manual UM-7FE0B (Shimano manual copy).