Skip to content

CyclingCharger guides

Can I Upgrade a BT-DN110 Bike by Fitting BT-DN300?

CyclingCharger editorial team · Updated 19 November 2026

If the old internal Di2 battery needs replacing, distinguish a like-for-like repair from a change of system. Shimano lists BT-DN110 with one SD50 port, and BT-DN300 with three SD300 ports. The similar battery shape does not establish that your wiring, derailleurs or charger can be carried over.

Make a parts map before asking for a quote

  1. List the current battery, front and rear derailleurs, left and right controls, accessible junction labels and the charger. Use the old parts list if the battery is hidden in the frame.
  2. Write the proposed exact replacements and check the full combination in Shimano's system chart. For a quoted BT-DN300 build, ask which parts can stay and which wire families or mounting parts change.
  3. Ask where the upgraded system will charge. A supported BT-DN110/Junction A build can use SM-BCR2. A listed BT-DN300/RD-R8150 build uses EW-EC300 at the rear derailleur. Budget separately for any new charging equipment.

Example: a quote saying “replace DN110 with DN300, reuse all charging equipment” leaves the charging path and the component chart unresolved. Ask for both that parts list and a like-for-like repair option. An adaptor on one cable cannot establish compatibility for the rest of the system.

Next: see what the SD50/SD300 adaptor does or check the current charging route.

Sources: Shimano specifications v029, battery and charging cable tables; Shimano C-473/C-842 component charts.