Skip to content

CyclingCharger guides

External to Internal Di2 Battery: A System Change, Not a Charger Swap

CyclingCharger editorial team · Updated 20 November 2026

Replacing an external Di2 battery arrangement with an internal battery is not solved by buying an internal-battery charger. The battery, mount, available space, wiring, junction or display and complete supported component group all need checking.

Separate the charging kit from the conversion

An identified removable SM-BTR1 uses the SM-BCR1 charging route for the removed battery. A supported BT-DN110 internal arrangement uses SM-BCR2 through an appropriate charging port. That comparison describes two charging tasks; it does not establish that a frame and existing build can accept the second battery.

Shimano's compatibility charts distinguish legacy battery and battery-mount groups. Their notes also require a suitable charging-port device for SM-BCR2 and exclude SM-EW67-A-E in the named SM-BCR2/SM-BTR2 arrangement. Simply seeing “Junction A” in a parts description does not complete a conversion plan.

Give the workshop a build record

Information to gather without opening a sealed battery
Area Record or verify
Existing electrical system Battery, battery mount, front/rear derailleur, shifters, junction/display and any wireless unit.
Frame accommodation Manufacturer-supported battery location and retention, space and wire routing.
Proposed battery system Exact supported component combination, including any configuration or firmware conditions.
Finished charging route A reachable supported charge port, specified charging device and complete power kit.

Choose the work before the parts order

A workshop may find that retaining the verified external arrangement is the appropriate option. If an internal conversion is supported, obtain the complete parts and labour scope before separately buying a charger. Do not pull waterproof connectors repeatedly, adapt battery terminals or modify a sealed pack to experiment.

BT-DN300 is another system generation with SD300 ports and its own supported charging arrangement; it is not a generic internal replacement for every legacy external bike. An advertised similar voltage or a battery that physically fits cannot establish the electrical build.

For ordinary replacement equipment, use the existing external-battery kit checklist. For a different internal generation, see BT-DN110 to BT-DN300 checks. Review the internal-charger offer only after the conversion and the supplied item's exact compatibility have been confirmed.

Sources and scope

Checked 20 November 2026. Model-specific instructions take priority over a general guide. This article is not a report of independent compatibility or battery testing.