CyclingCharger guides
Where Is the Di2 Junction A Charging Port?
CyclingCharger editorial team · Updated 19 November 2026
On Shimano Di2 bikes that charge at Junction A, the charging socket can be on a box beneath the stem, at a bar end or in a frame fitting. There may be no loose box visible. Find the part and confirm the socket in its manual before plugging anything in.
Start at the cockpit
- Separate junction box: look around and under the stem for an SM-EW90-A or SM-EW90-B. The Shimano SM-EW90 diagram labels the charging port separately from the E-TUBE wiring ports, as well as the button and LEDs. Use the labels in the diagram to distinguish them.
- Flush mount: look at the bar ends and any labelled frame fitting for EW-RS910. Shimano describes this junction as a built-in bar-end or frame type. Use a torch and look for the controls and charge-port cover before assuming a blank bar-end plug is the junction. Don't prise it out.
- No match: check the component list or take a photo for your workshop. A box that turns out to be Junction B or a simple E-TUBE junction may have wiring ports without a charging socket.
Test the identification on a used bike
If a seller says “Ultegra 11-speed” and sends a photo of a flush bar end, ask for the EW-RS910 label or build sheet and the installed battery model. If the label is SM-EW67-A-E instead, Shimano expressly rules out the SM-BCR2/SM-BTR2 combination with that junction. Don't test fit a plug to resolve that uncertainty.
Next: check the battery and junction combination before selecting any cable.
Sources: Shimano EW-RS910; Shimano SM-EW90-A manual, names of parts (copy); Shimano C-473; EW-WU111 manual, example bar-end layout (copy).