Skip to content

CyclingCharger guides

ST-R8170 Lever Batteries: Check Before Replacing the Charger

CyclingCharger editorial team · Updated 20 November 2026

A wireless shift lever has its own battery check. Charging the Di2 main battery through the rear derailleur does not recharge the lever's coin cell. If you are preparing for a trip or maintaining an ST-R8170 lever, check its own indication rather than treating a green rear-derailleur light as proof that everything is charged.

Make the lever check, not the derailleur check

The checked Dual Control Lever user manual UM-0MX0A describes holding two shift switches simultaneously for at least 0.5 seconds. Its lever indication is yellow-green for 11–100%, red for 1–10%, and off for 0%. Use the button positions and diagram for the lever fitted to your bike. This is different from a short press on RD-R8150 and its 51–100% / 26–50% / 1–25% main-battery bands.

If the lever remains unresponsive after the appropriate battery check or replacement, do not keep buying cells. Check the exact lever model, pairing and button assignment through its instructions or a workshop. The single-input fault checklist deals with that separate diagnosis.

Prepare a clean replacement

Leave a useful maintenance record

Write down which lever you checked, its indication, the replacement date and whether it operated afterwards. Keep button cells away from children and handle disposal according to local battery-collection guidance. A damaged holder, seal or contact is a service issue, not a reason to improvise a different cell.

For a normal main-battery charge, return to the separate charging route. This lever task does not require an internal-battery charger purchase.

Sources and scope

Checked 20 November 2026. Model-specific instructions take priority over a general guide. This article is not a report of independent compatibility or battery testing.