Skip to content

CyclingCharger guides

Wired vs Wireless Di2 Levers: Which Batteries Need Attention?

CyclingCharger editorial team · Updated 20 November 2026

Electronic Di2 shifting does not mean that every lever has a replaceable coin cell. Shimano's current tables distinguish wired-only ST-R8150 levers from wireless-capable ST-R8170 levers. Identify the actual ST model before putting coin cells on a maintenance list.

Compare two named Ultegra arrangements

Electrical entries in Shimano's 2026–2027 specification; not a swap recommendation
Check ST-R8150-R / L ST-R8170-R / L
Shifting connectivity listed Wired Wired and wireless capability listed
Battery entry No separate battery listed CR1632
Maintenance implication Investigate the supported wired/main-battery system; do not search for a coin-cell holder based only on “Di2”. For the fitted arrangement, follow the lever's own battery indication and holder instructions.

These models also belong to different brake arrangements. Their electrical comparison does not establish that they can replace each other on a bicycle. Brake compatibility, installation, complete system support and configuration must be checked separately by the appropriate workshop.

Make a battery inventory for your build

  1. Record the full left and right lever models, including any replacement fitted later.
  2. Record whether the actual arrangement is wired or wireless, using the build record and applicable instructions rather than cable visibility alone.
  3. Record the main-battery and charging route separately. A coin cell is not charged by connecting EW-EC300 at the rear derailleur.
  4. Add a power meter or other device to its own line; its battery indication is not a substitute for a Di2 check.

Choose the right next action

A low main battery calls for its supported charging procedure. A low replaceable lever battery calls for the model-specific holder and cell instructions. A missing single input after an appropriate battery check may instead need pairing, settings or wire investigation; do not assume every missing shift means an empty battery.

Use the ST-R8170 battery check only for the relevant lever instructions, and the single-input fault guide for diagnosis. A charging-device purchase follows the main battery and charge port, not the lever's brand name.

Sources and scope

Checked 20 November 2026. Model-specific instructions take priority over a general guide. This article is not a report of independent compatibility or battery testing.